Install Iatkos S3 V2 From Usb Flash Drive

Inception After my experience with iAtkos s3 v2 and Acer Aspire One D150 i decided to write a guide can help someone. Hardware Config: This is the hardware configuration of my Acer Aspire One D150-1Bb. It's very important check the components.

Install iatkos s3 v2 from usb windows. Sponsored High Speed Downloads install iatkos s3 v2 from usb windows [Full Download]. Video show how can you install Windows 7 or Windows Vista or Windows 2008 from USB drive to a netbook or notebook (without CD or DVD-ROM) using Novicorp WinToFlash software. Read More / Download #12 iAtkos S3.

CPU: Intel Atom N270 @ 1,6Ghz 32-bit RAM: Corsair 2Gb Video: Display Intel 945GSE Wireless: Broadcom4312 Ethernet: Atheros AR8121 Whats is necessary 1. USB Pen 8Gb 2.

Ethernet Network 3. An other Hackintosh o Mac 4. Many patience. Pre-Install: Boot from USB After you download the iAtkos s3 v2 (Snow Leopard 10.6.3) ISO you can restore it on USB at least 8Gb. You can do it with another Mac or Hackintosh, or if you have external DvD reader, you can create a DvD to boot.

Restore the ISO of iAtkos with Utility Disk and then you must install the bootloader. The only one that works for me it was Chameleon v2 RC4.

Cyberlink powerdirector 12 crack only hp. How to use zwt keygen acrobat 8 Renault has finally launched the Captur in India with prices starting at Rs 9.99 lakh.

Pay attention where you install the bootloader! After that the iAtkos is ready to install. Installation The BIOS Put the USB before start the PC.

On Start push F2 to access to BIOS where we need to set the Hard Disk in SATA Mode. So, from 'Information' tab slide to 'Main' tab and scroll down to ' SATA Mode'. Set it on ' AHCI'.

After that slide to 'Boot' tab and scroll down to USB HDD, pushing F6 take the usb on the first place. Now save all with F10 and Yes. The USB will boot. The Installer I don't write flag on boot for the installation, if you have some problems you can try with verbose (-v). During the installation the trackpad will not work, but the keyboard yes, so you can use a USB Mouse (mine is a wireless mouse, so i suppose they works).

With Utility Disk create the partition e go on with the installation. When you select the partition where you want install iAtkos, go on Customization (button on bottom left - I'm Italian, so my label is different). You need to install: Bootloader: Chameleon v2 RC4 (the others bootloader gives to me only problems) Bootloader Options: GraphicsEnabler, USBFix Patches: /Extra directory, fakesmc, Disabler, RTC, Modified Kernels -> Intel Atom, USB, UUID Main Hardware: SATA/IDE: AHCI SATA, Intel SATA/IDE Audio: Voodoo Audio PS/2: Voodoo PS/2 CPU Power Management: select all Laptop Hardware: Battery, Card Reader, TSC Sync VGA: Intel (select the first three voice) Network: Wireless: don't select anything. Bcm4312 card gives to me some problem during the first boot, so we will install it after. Wired: Atheros (Select all) Now you can install iAtkos s3 v2. Post-Install: il primo avvio Try one first boot without flag on boot, if you can't start try with these: -v -f npci=0x2000 arch=i386 cpus=1 GraphicsEnabler=No(o Yes) Follow the first boot and the configuration of your account and now download all necessary files for setting up the aspire one, because after that you can have some USB problems.

Because the CPU is an Intel Atom we need to use a modified kernel. You can find ( the original post) the atom kernel of Snow Leopard 10.6.8.

More or less i followed the post step by step, skipping some step about SL 10.6.7. IT'S VERY IMPORTANT do a backup of the kext IOUSBFamily.kext e IOUSBMassStorageClass.kext that are necessary to work the USB after the update, that replaces this files. What you have to do: 1. Download and unzip the kernel on Desktop 2. Start Terminal.app and write this sudo -s mv ~/Desktop/mach_kernel_atom / cd ~/Desktop mkdir backup cd /S*/L*/E* cp -R AppleHDA.kext ~/Desktop/backup/ cp -R IOUSBMassStorageClass.kext ~/Desktop/backup/ cp -R IOUSBFamily.kext ~/Desktop/backup/ Now you can start the update ONLY FROM COMBO UPDATE (you can find ). IT'S VERY IMPORTANT that, when update finish: NOT reboot. Back on Terminal and write cd /S*/L*/E* rm -Rf AppleIntelGMA950.kext rm -Rf AppleIntelIntegratedFramebuffer.kext rm -Rf AppleHDA.kext cp -R ~/Desktop/backup/*./ 4.

Delete SleepEnabler.kext On my installation the 'Extra' folder was hidden, so with ShowHiddenFiles.app you need to show it. Delete SleepEnabler.kext from /Extra/Extensions*. Age of empires 2 conquerors kings no install working multiplayer. Probably the system go on Kernel Panic because SleepEnabler.kext, so try this flag pmVersion=0 or 21 or 23 and when you can remove SleepEnabler.kext 5. Restore USB kext We put 'backups' folder on S/L/E (/System/Library/Extensions) folder so copy IOUSBFamily.kext and IOUSBMassStorageClass.kext and paste it on /S/L/E. If you not have a backup there is mine: Repair permissions with KextUtility. Edit kernel on boot.plist On my Extra folder i don't have any org.chameleon.boot.plist, so i edit com.apple.boot.plist on /Library/Preferences/SystemConfiguration.